Carton package
Casing bead is an edge treatment material used in construction and interior design, primarily at the joints of walls and ceilings. It is usually made of metal or plastic, designed to provide a sturdy and flat edge, ensuring a smooth and aesthetically pleasing connection between materials such as drywall. The primary function of casing bead is to protect edges from impact and wear, reducing damage caused by everyday use.
Render stop bead
Plaster stop bead
Aluminium Casing Bead (Half Angle)
Plasterboard Edge Bead
Render stop bead is used to obtain a neat bell-cast lower edge at the bottom of the external render finish to protect the edge and provide excellent protection to masonry against run-off water.
| Reference | Plaster Depth (mm) | Length (mm) | Material | |
|---|---|---|---|---|
| RSBGS16 | 16 | 3000 | Galvanized steel | |
| RSBGS19 | 19 | 3000 | Galvanized steel | |
| RSBSS16 | 16 | 3000 | Stainless steel | |
| RSBSS19 | 19 | 3000 | Stainless steel | |
Plaster stop bead is a kind of J-shaped angle bead made from galvanized steel sheet or stainless steel sheet.
Plaster stop bead provides straight edges for one or two-coat veneer plaster finishes to wall openings and wall or ceiling intersections and protect plaster edges from damage. Besides, its wide wings enhances the bonding property of the plaster to prevent it from cracking.
| Reference | Plaster Depth (mm) | Length (mm) | Material |
|---|---|---|---|
| PSBGS10 | 10 | 2400 / 2700 / 3000 | Galvanized steel/Stainless steel |
| PSBGS13 | 13 | ||
| PSBGS16 | 16 | ||
| PSBGS19 | 19 | ||
| PSBGS22 | 22 |
Aluminium Casing Bead (Half Angle) are used to terminates stucco and plaster against windows, doors and other dissimilar materials. Provides a tapered transition, to direct moisture away from the wall. Do not cover exterior angle of bead with stucco or plaster.
| Reference | Ground (A) | Flange (B) | Length |
|---|---|---|---|
| ACB58 | 5/8" | 2" | 10' |
| ACB34 | 3/4" | 2" | 10' |
| ACB78 | 7/8" | 2" | 10' |
| ACB1 | 1" | 2" | 10' |
| ACB114 | 1-1/4" | 2" | 10' |
| ACB112 | 1-1/2" | 2" | 10' |
| ACB2 | 2" | 2" | 10' |
Plasterboard edge bead is available in three different depths to suit various plasterboard thicknesses. It can be cut to the required size using tin-snips and/or a hacksaw. The perforated metal wing provides a suitable key to help prevent cracking. Care should be taken to avoid damaging the bead and coating during trowelling.
You can choose to use more environmentally friendly pallet packaging or custom-made cardboard boxes for packaging. A pack of 25 / 50 / 100 pieces
| Reference | Length (mm) | Width (mm) | Pack |
|---|---|---|---|
| PEB24 | 2400 | 9.5 / 12.5 / 15 | 25 / 50 / 100 |
| PEB27 | 2700 | ||
| PEB30 | 3000 |
Carton package
Plastic film package
Wood case package
Loading & shipping
